SPC-1810S-NC

SKU: SPC-1810S-NC  /  

Rigid Machine Structure
Precision Spindles
Slide Table

1. Rigid Machine Structure
(1) The machine structure is manufactured from high quality Meeharite cast iron, heat treated and stress relieved before machining.
(2) Sideways are high frequency hardened and precision ground. Maximum material stability for deformation-free and outstanding wear resistance.

2. Precision Spindles
(1) The grinding wheel spindle and the regulating wheel spindle are precision machined from Nickel Chromolybedenum alloy steel (SNCM-220). Also, they are subject to various treatments such as: normalized, tempered and carburized hardening. Then, the spindles are thru sub-zero treated – under zero degrees, precision ground and precision machined.
(2) The inside of spindle is tempered to hardness HRC 25°~30°, while surface hardness reaches over HRC 62. The precision ground spindle is excellent for heavy-duty machining and features powerful torque, long service life, deformation-free and maximum wear resistance.

3. Slide Table
(1) Upper slide swiveling is easy and accurate to adjust for making the machine suitable for infeeding grinding. Also, it allows grinding for a varied diameter fo workpieces. The Upper slide with +5°~-5° swiveling allows taper grinding by using infeed grinding mode.
(2) With thrufeed grinding, the Upper slide provides a surface contact adjustment between the workpiece and grinding wheel. Swiveling adjustment range is +5°~-3°.
(3) Dovetailed slideway on the upper slide features smooth and accurate feeding and is lubricated by a centralized lubricator.
(4) The bottom slide moves on “Λ” shaped and double-wedged ways.
The slideways are hardened and precision ground. They feature smooth movement and properly protected to prevent dust from entering. Micrometric feed adjustment unit is 0.001 mm to meet high accuracy requirements for all workpieces.

SPECIFICATIONS SPC-18S-NC SPC-1810S-NC SPC-1812S-NC SPC-20S-NC
Grinding Wheel        
Standard grinding range (Dia.) Ø1~Ø80 mm Ø1~Ø80 mm Ø1~Ø80 mm Ø1~Ø80 mm
Capacity increases with special arrangement Ø40~Ø150 mm Ø40~Ø150 mm Ø40~Ø150 mm Ø40~Ø150 mm
Grinding wheel size (O.D. x width x I.D.) Ø455 x 205 x Ø228.6 Ø455 x 255 x Ø228.6 Ø455 x 305 x Ø228.6 Ø510 x 205 x Ø304.8
Grinding wheel speed 1500 R.P.M. 1260 R.P.M. 1260 R.P.M. 1200 R.P.M.
Grinding wheel motor 15 HP x 4P 15 HP x 4P 20 HP x 4P 20 HP x 4P
Regulating Wheel        
Regulating Wheel size (O.D. x width x I.D.) Ø255 x 205 x Ø111.2 Ø255 x 255 x Ø111.2 Ø255 x 305 x Ø111.2 Ø305 x 205 x Ø127
Regulating Wheel speed 10~300 R.P.M. (Variable) 10~300 R.P.M. (Variable) 10~300 R.P.M. (Variable) 10~300 R.P.M. (Variable)
Regulating Wheel motor / S series 3.0 KW servo motor 3.0 KW servo motor 3.5 KW servo motor 3.5 KW servo motor
Regulating Wheel tilt angle +5° ~ -3° +5° ~ -3° +5° ~ -3° +5° ~ -3°
Regulating Wheel swivel angle ±5° ±5° ±5° ±5°
Handwheel Graduation        
Upper slide feed graduation 3.5 mm/rev.  0.05 mm/graduation 3.5 mm/rev.  0.05 mm/graduation 3.5 mm/rev.  0.05 mm/graduation 3.5 mm/rev.  0.05 mm/graduation
Upper slide micro-feed graduation 0.1 mm/rev.  0.001 mm/graduation 0.1 mm/rev.  0.001 mm/graduation 0.1 mm/rev.  0.001 mm/graduation 0.1 mm/rev.  0.001 mm/graduation
Lower slide feed graduation 9 mm/rev. 0.05 mm/graduation 9 mm/rev. 0.05 mm/graduation 9 mm/rev. 0.05 mm/graduation 9 mm/rev. 0.05 mm/graduation
Trimming device graduation 2 mm/rev.  0.01 mm/graduation 2 mm/rev.  0.01 mm/graduation 2 mm/rev.  0.01 mm/graduation 2 mm/rev.  0.01 mm/graduation
Drive Motors        
Hydraulic pump motor 1 HP x 4P 1 HP x 4P 1 HP x 4P 1 HP x 4P
Coolant pump motor 1/4 HP x 2P 1/4 HP x 2P 1/4 HP x 2P 1/4 HP x 2P
Machine Dimensions 2200 x 1840 x 1530 mm 2200 x 1840 x 1530 mm 2350 x 1950 x 1530 mm 2350 x 1900 x 1530 mm
Net weight 3000 kgs 3000 kgs 3500 kgs 3600 kgs
Gross weight 3300 kgs 3300 kgs 3800 kgs 3900 kgs
Packing dimensions 2450 x 1940 x 1900 mm 2450 x 1940 x 1900 mm 2690 x 2100 x 1900 mm 2690 x 2100 x 1900 mm
TOP